Rexing USA
Rexing Fuse Tap and Add-a-Circuit Adapter with LP-mini, Mini Fuse, Micro2 blade fuse adapters
Rexing Fuse Tap and Add-a-Circuit Adapter with LP-mini, Mini Fuse, Micro2 blade fuse adapters
- BLADE FUSE ADAPTER TYPE -Ā 2x Low profile LP mini (APS) fuse adapter with 2 Amp low profile mini blade fuses; 2x Mini fuse adapter with 2 Amp mini blade fuses; 2x Micro2 (APT, ATR) fuse adapter with 2 Amp standard blade fuses.
- DUAL-SLOT FUSE HOLDER -Ā It provides one fuse holder to protect the original circuit and provides a lead with the second fuse holder for the new circuit.
- EASY TO USE -Ā Plug into an existing fuse holder. Easy to install the additional circuits without splicing or cutting.
- WIDELY APPLICATION -Ā Compatible with Rexing hardwire kits and commonly fits for blade fuses (rating 2Amp-40Amp).
- HIGH-QUALITY WIRE -Ā Made from excellent materials, good electrical conductivity, and melting resistance.
EASY TO INSTALL
Find the Correct Fuse Slot
Locate the car fuse box, please refer to your carās manual. Open the fuse box, find the correct fuse slot for your hardwire kit. If you need to find an ignition switched fuse, put the key in the vehicle, find the fuse which is not lit up while the car is off, and test it by turning the car on to see if it lights up. If your kit requires constant power, turn off the car and remove the key to see which fuse slots stays lit on.
Connect the Red Wire
Our hardwire Kit comes with a 15A Mini-type fuse. Plug the red wire fuse connector into the switched fuse box in the correct orientation.
Connect the Yellow Wire
Plug the yellow wire fuse connector into the hot fuse box in the correct orientation.
Ground the Hardwiring Kit
Slip the black wire (which is in the shape of a C) under a metal bolt or screw in your vehicle (this is the ground wire). Check that it is not attached onto plastic parts. You will typically need a socket wrench to loosen the nut or bolt that you choose to ground with. To attach the grounding terminal, loosen the nut or bolt enough to slip it in and tighten it back up afterward.